操作系统实现1_bochs 和 nasm 安装

操作系统实现1_bochs 和 nasm 安装

1.1 bochs安装

wget https://nchc.dl.sourceforge.net/project/bochs/bochs/2.6.9/bochs-2.6.9.tar.gz sudo tar zxvf bochs-2.6.9.tar.gz sudo ./configure --enable-debugger --enable-disasm sudo make sudo make install

1

2

3

4

5

安装完成后显示如下：

(coos) ubuntu@ubuntu:~/bochs-2.6.9$ bochs ======================================================================== Bochs x86 Emulator 2.6.9 Built from SVN snapshot on April 9, 2017 Compiled on Jan 26 2019 at 23:13:17 ======================================================================== 00000000000i[ ] BXSHARE not set. using compile time default '/usr/local/share/bochs' 00000000000i[ ] reading configuration from .bochsrc 00000000000e[ ] .bochsrc:187: wrong value for parameter 'model' 00000000000p[ ] >>PANIC<< .bochsrc:187: cpu directive malformed. 00000000000e[SIM ] notify called, but no bxevent_callback function is registered 00000000000e[SIM ] notify called, but no bxevent_callback function is registered ======================================================================== Bochs is exiting with the following message: [ ] .bochsrc:187: cpu directive malformed. ======================================================================== 00000000000i[CPU0 ] CPU is in real mode (active) 00000000000i[CPU0 ] CS.mode = 16 bit 00000000000i[CPU0 ] SS.mode = 16 bit 00000000000i[CPU0 ] EFER = 0x00000000 00000000000i[CPU0 ] | EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000000 00000000000i[CPU0 ] | ESP=00000000 EBP=00000000 ESI=00000000 EDI=00000000 00000000000i[CPU0 ] | IOPL=0 id vip vif ac vm rf nt of df if tf sf ZF af PF cf 00000000000i[CPU0 ] | SEG sltr(index|ti|rpl) base limit G D 00000000000i[CPU0 ] | CS:0000( 0000| 0| 0) 00000000 00000000 0 0 00000000000i[CPU0 ] | DS:0000( 0000| 0| 0) 00000000 00000000 0 0 00000000000i[CPU0 ] | SS:0000( 0000| 0| 0) 00000000 00000000 0 0 00000000000i[CPU0 ] | ES:0000( 0000| 0| 0) 00000000 00000000 0 0 00000000000i[CPU0 ] | FS:0000( 0000| 0| 0) 00000000 00000000 0 0 00000000000i[CPU0 ] | GS:0000( 0000| 0| 0) 00000000 00000000 0 0 00000000000i[CPU0 ] | EIP=00000000 (00000000) 00000000000i[CPU0 ] | CR0=0x00000000 CR2=0x00000000 00000000000i[CPU0 ] | CR3=0x00000000 CR4=0x00000000 bx_dbg_read_linear: physical memory read error (phy=0x000000000000, lin=0x00000000) 00000000000i[SIM ] quit_sim called with exit code 1

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

1.2 nasm 安装

sudo apt-get install nasm

1

1.3 示例程序

//boot.asm org 07c00h ; 告诉编译程序加载到 7c00 处 mov ax, cs mov ds,ax mov es,ax call DispStr ; 调用显示字符串例程 jmp $ ; 无限循环 DispStr: mov ax,BootMessage mov bp,ax ; ES : BP = 串地址 mov cx,16 ; CX = 串长度 mov ax,01301h ; AH = 13 , AL = 01h mov bx,000ch ; 页号为 0 (BH = 0) 黑底红字 (BL = 0Ch, 高亮) mov dl,0 int 10h ; 10h 号中断 ret BootMessage: db "Hello, OS World!" times 510-($-$$) db 0 ; $-$$ 表示本行距离程序开始处的相对距离 ``; 用 0 填充剩下的空间，使生成二进制恰好 512 字节 dw 0xaa55 ; 结束标志

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

终端中编译：

nasm boot.asm -o boot.bin

1

1.4 用 bochs 生成软盘

终端输入

bximage

1

操作如下：

ubuntu@ubuntu:~/coos$ bximage ======================================================================== bximage Disk Image Creation / Conversion / Resize and Commit Tool for Bochs $Id: bximage.cc 13069 2017-02-12 16:51:52Z vruppert $ ======================================================================== 1. Create new floppy or hard disk image 2. Convert hard disk image to other format (mode) 3. Resize hard disk image 4. Commit 'undoable' redolog to base image 5. Disk image info 0. Quit Please choose one [0] 1 Create image Do you want to create a floppy disk image or a hard disk image? Please type hd or fd. [hd] fd Choose the size of floppy disk image to create. Please type 160k, 180k, 320k, 360k, 720k, 1.2M, 1.44M, 1.68M, 1.72M, or 2.88M. [1.44M] What should be the name of the image? [a.img] a.img Creating floppy image 'a.img' with 2880 sectors The following line should appear in your bochsrc: floppya: image="a.img", status=inserted ubuntu@ubuntu:~/coos$

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

将引导扇区写进软盘：

dd if=boot.bin of=a.img bs=512 count=1 conv=notrunc

1

再编写 bochsrc 配置

//bochsrc #configuration file foe bochs #how much memory the emulated machine will have megs: 32 #filename of ROM images romimage:file=/home/ubuntu/bochs-2.6.9/bios/BIOS-bochs-latest # 这个文件需要自己在电脑里找 vgaromimage:file=/home/ubuntu/bochs-2.6.9/bios/VGABIOS-lgpl-latest # 这个文件需要自己在电脑里找 #what disk images will be used floppya:1_44=a.img,status=inserted #choose he boot disk boot:floppy #where do we send log messages log:bochsout.txt #disable the mouse mouse:enabled=0 #enable key mapping,using US layout as default keyboard:keymap=/home/ubuntu/bochs-2.6.9/gui/keymaps/x11-pc-us.map

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

编写完成后：

bochs -f bochsrc

1

调试指令略

结果如下：

Windows

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。